🎧 Beta testers wanted: free Mac app for Sony headphones (macOS 14+). Tell us your model, we'll make it work.Become a beta tester →
Headphone Control

How to control Sony ULT WEAR on Mac: pairing, ANC & EQ

ULT WEAR pairs with a Mac through its Bluetooth button. Controlling it from the Mac is a different question: our beta implements the Sony protocol, but nobody has reported a ULT WEAR result yet.

Join the free beta

Pair ULT WEAR with your Mac

Sony documents Mac pairing for ULT WEAR on macOS 11 or later. The headphones show up as “ULT WEAR”, not by the WH-ULT900N model number.

  1. Put the headphones in pairing modeWith the headphones off, press and hold the Bluetooth button for about 5 seconds. The blue indicator flashes twice in a row, repeatedly, and you hear “Pairing”.
  2. Connect from System SettingsOn the Mac, open System Settings > Bluetooth and click Connect next to ULT WEAR. If a passkey is requested, Sony’s guide says to enter 0000.
  3. Choose the headphones as outputPick ULT WEAR in the Sound menu or System Settings > Sound > Output and check playback before opening a controller.

Calls, music and what is untested

Sony’s guide notes that music uses the A2DP profile and calls use HFP/HSP. When an app opens the microphone, macOS switches profiles and playback quality drops. That is normal Bluetooth behaviour, not a fault.

Headphone Control has not been tested on ULT WEAR. We don’t know yet whether noise control, ambient sound, EQ or the ULT bass mode respond. Other projects list ULT WEAR too: SonyBridge’s README table marks it verified, while its text says only the WH-CH720N is fully hardware-verified.

Own a ULT WEAR? Run the 2-minute test

Confirm Mac audio, then try noise canceling, ambient sound and EQ separately. Say whether each change was audible. Post in Discussion #2 or use the options below. “It didn’t connect” is useful too.

  1. Connection: does the app show the right model and Connected?
  2. Noise control: try ANC and Ambient. Did the headphones actually change mode?
  3. EQ: compare one preset with Off at the same volume. Did the sound change?
  4. Battery and device switching: note the values shown. If you try switching between Mac and phone, record the result separately.

On your Mac: install Apple TestFlight, open the invitation, then Accept → Install. Accepting alone does not install the app. Requires macOS 14+, even if Apple’s generic invitation text says 13. App Store 1.0 is under review.

Copy this into your report

Headphones: ULT WEAR (WH-ULT900N)
Firmware:
Mac model / macOS version:
Headphone Control version / build:
App shows Connected:
ANC changed on the headphones:
EQ changed audibly:
Battery (left / right / case if shown):
Multipoint / device switching (if tested):
What worked / failed:
Steps to reproduce:

Real app. One tested model.

This is a real WH-1000XM5 screenshot. It does not show that any other model works.

Headphone Control with WH-1000XM5 on real hardware.

Watch the real XM5 demo
Headphone Control with WH-1000XM5 on real hardware.

Test status by model

ModelStatusGuide
WH-1000XM5Developer-tested on hardwareMac guide
WH-CH720NUser report: works (1 report)Mac guide
WH-1000XM4Untested: report neededMac guide
WH-1000XM6Untested: report neededMac guide
WF-1000XM4Untested: report neededMac guide
WF-1000XM5Untested: report neededMac guide
ULT WEARUntested: report neededMac guide
LinkBudsUntested: report neededMac guide

Statuses change only with a real result. Own one of these? Post what worked and what didn’t in Discussion #2.

Questions

Can I control Sony ULT WEAR from a Mac?

Sony has no Mac app. Headphone Control is a free macOS 14+ beta that implements the Sony protocol, but ULT WEAR is untested. Install it and report the result in GitHub Discussion #2.

How do I pair ULT WEAR with a Mac?

Hold the Bluetooth button for about 5 seconds until the indicator double-flashes blue and you hear “Pairing”. Click Connect next to ULT WEAR in System Settings > Bluetooth; enter 0000 if asked.

Why does ULT WEAR sound worse during calls on a Mac?

Calls use the HFP/HSP Bluetooth profile, which carries the microphone but lowers playback quality. Music returns to A2DP once the microphone is released.

Sources

Primary sources checked on 18 November 2026. Sony’s pairing instructions describe Bluetooth audio, not Headphone Control compatibility.

Join the free beta

On your Mac: install Apple TestFlight, open the invitation, then Accept → Install. Accepting alone does not install the app. Requires macOS 14+, even if Apple’s generic invitation text says 13. App Store 1.0 is under review.

Join the free beta

Keep reading