🎧 Beta testers wanted: free Mac app for Sony headphones (macOS 14+). Tell us your model, we'll make it work.Become a beta tester →
Headphone Control

How to control Sony WH-CH720N on Mac: pairing, ANC & EQ

The WH-CH720N is the first model besides the XM5 with a working report: one beta user says Headphone Control works with theirs. That is one report, not a developer test, so here is exactly what we know.

Join the free beta

Pair the WH-CH720N with your Mac

Sony documents Mac pairing for this model on macOS 11 or later. The headphones remember up to 8 devices.

  1. Put the headphones in pairing modeWith the headphones off, press and hold the power button for about 5 seconds or more. The blue indicator flashes twice in a row, repeatedly, and you hear “Pairing”.
  2. Connect from System SettingsOn the Mac, open System Settings > Bluetooth and click Connect next to WH-CH720N. If a passkey is requested, Sony’s guide says to enter 0000. Pairing mode ends after about 5 minutes.
  3. Choose the headphones as outputPick WH-CH720N in the Sound menu or System Settings > Sound > Output and check playback. Later, to reconnect, Control-click WH-CH720N in Bluetooth settings and choose Connect.

What the user report does and doesn’t prove

On 17 November 2026 a beta tester publicly reported that Headphone Control works with their WH-CH720N. The developer does not own this model, so it has not been tested by us. One report covers one firmware, one Mac and the features that person tried.

That is why the site says “user-reported” rather than “tested”. Two or three more reports, especially ones that list which controls changed, would let us call it confirmed. If you need a controller verified on CH720N hardware today, SonyBridge’s README describes the WH-CH720N as its fully hardware-verified model.

Own a WH-CH720N? Add your report

Confirm Mac audio first, then try noise canceling, ambient sound and EQ one at a time. For each one, write whether the headphones actually changed. Mention your firmware if you know it. Post in Discussion #2 or use the options below.

  1. Connection: does the app show the right model and Connected?
  2. Noise control: try ANC and Ambient. Did the headphones actually change mode?
  3. EQ: compare one preset with Off at the same volume. Did the sound change?
  4. Battery and device switching: note the values shown. If you try switching between Mac and phone, record the result separately.

On your Mac: install Apple TestFlight, open the invitation, then Accept → Install. Accepting alone does not install the app. Requires macOS 14+, even if Apple’s generic invitation text says 13. App Store 1.0 is under review.

Copy this into your report

Headphones: WH-CH720N
Firmware:
Mac model / macOS version:
Headphone Control version / build:
App shows Connected:
ANC changed on the headphones:
EQ changed audibly:
Battery (left / right / case if shown):
Multipoint / device switching (if tested):
What worked / failed:
Steps to reproduce:

Real app. One tested model.

This is a real WH-1000XM5 screenshot. It does not show that any other model works.

Headphone Control with WH-1000XM5 on real hardware.

Watch the real XM5 demo
Headphone Control with WH-1000XM5 on real hardware.

Test status by model

ModelStatusGuide
WH-1000XM5Developer-tested on hardwareMac guide
WH-CH720NUser report: works (1 report)Mac guide
WH-1000XM4Untested: report neededMac guide
WH-1000XM6Untested: report neededMac guide
WF-1000XM4Untested: report neededMac guide
WF-1000XM5Untested: report neededMac guide
ULT WEARUntested: report neededMac guide
LinkBudsUntested: report neededMac guide

Statuses change only with a real result. Own one of these? Post what worked and what didn’t in Discussion #2.

Questions

Does Headphone Control work with Sony WH-CH720N?

One beta user has reported that it works. The developer has not tested the WH-CH720N, so treat it as user-reported, not confirmed. More reports in GitHub Discussion #2 help.

How do I pair WH-CH720N with a Mac?

Hold the power button for about 5 seconds until the indicator flashes blue twice and you hear “Pairing”. Then click Connect next to WH-CH720N in System Settings > Bluetooth and enter 0000 if asked.

Is there an official Sony app for WH-CH720N on Mac?

No. Sony’s Sound Connect app is for iPhone and Android. Use it for firmware updates; a Mac controller only changes everyday settings.

Sources

Primary sources checked on 18 November 2026. Sony’s pairing instructions describe Bluetooth audio, not Headphone Control compatibility.

Join the free beta

On your Mac: install Apple TestFlight, open the invitation, then Accept → Install. Accepting alone does not install the app. Requires macOS 14+, even if Apple’s generic invitation text says 13. App Store 1.0 is under review.

Join the free beta

Keep reading